Toll Free
(800) 504-9757


(336) 765-0910
Get FREE SHIPPING if you order $100 more! (continental US only)

Heat Presses

NOTE: These items are drop shipped from the manufacturer in Massachusetts.  Please allow an additional 2-3 business days for shipping on all heat presses.

 

  • $1,075.00

    DK16 14 x 16 Clamshell Heat Press

    A mid-sized clamshell, the 14 x 16 DK16 opens for full access to the lower bottom table. This press is the lowest cost solution for a business grade heavy-duty Digital heat press machine. It is important to note that the back of the heat platen raises above and away from the bottom table, providing better access than other clamshell presses. The frame support allows operators to slide shirts over the table with complete drape space around and underneath the loading area. Interchangeable bottom tables for smaller pressing areas are available. This press is ideal for environments with space limitations, and for users who need more portability and mobility than the over-weight swingaway presses.

    The DK16 can be easily upgraded to an automatic release press with the “Pop-Up” upgrade. This allows for faster semi-automatic garment production at a very reasonable price.

     

    NOTE: These items are drop shipped from the manufacturer in Massachusetts.  Please allow an additional 2-3 business days for shipping on all heat presses.

     

  • DK16 Clamshell Auto Release Pop-Up Upgrade
    $195.00

    DK16 Clamshell Auto Release Pop-Up Upgrade

    Available for the DK16 is our new automatic release feature. This amazing high-tech upgrade makes your Digital Knight clamshell act like a semi-automatic, air operated press, without the compressor! Simply close the press as you normally do, and at the end of the digital timing cycle the press releases automatically.

    The Auto-Release upgrade also features the “HOVER” feature. This means when the handle is lowered without fully clamping the machine, the press will hover over the work, usually needed for curing purposes. At the end of the time cycle the press releases automatically as usual.

    This upgrade is factory installed by a technician at no additional charge when purchased together with the DK16. However, for a pre-existing DK16, customer installation is easy and fast.

     

    NOTE: These items are drop shipped from the manufacturer in Massachusetts.  Please allow an additional 2-3 business days for shipping on all heat presses.

     

     

  • DK20 Digital Knight 16 x 20 Clamshell Heat Press
    $1,325.00

    DK20 16 x 20 Clamshell Heat Press

    The largest clamshell, the 16 x 20 DK20 opens for full access to the lower bottom table. It is important to note that the back of the heat platen raises above and away from the bottom table, providing better access than other clamshell presses. The frame support allows operators to slide shirts over the table with complete drape space around and underneath the loading area. Interchangeable bottom tables for smaller pressing areas are available. This press is ideal for environments with space limitations, and for users who need more portability and mobility than the over-weight swingaway presses.

    The DK20 can be easily upgraded to an automatic release press with the “Pop-Up” upgrade. This allows for faster semi-automatic garment production at a very reasonable price. Add to this the twin station upgrade as well, and you have the ultimate clamshell dual station light production machine.

     

    NOTE: These items are drop shipped from the manufacturer in Massachusetts.  Please allow an additional 2-3 business days for shipping on all heat presses.

     

     

  • DK20 Clamshell Auto Release Pop-Up Upgrade
    $195.00

    DK20 Clamshell Auto Release Pop-Up Upgrade

    Available for the DK20 is our new automatic release feature. This amazing high-tech upgrade makes your Digital Knight clamshell act like a semi-automatic, air operated press, without the compressor! Simply close the press as you normally do, and at the end of the digital timing cycle the press releases automatically.

    The Auto-Release upgrade also features the “HOVER” feature. This means when the handle is lowered without fully clamping the machine, the press will hover over the work, usually needed for curing purposes. At the end of the time cycle the press releases automatically as usual.

    This upgrade is factory installed by a technician at no additional charge when purchased together with the DK20. However, for a pre-existing DK20, customer installation is easy and fast.

     

    NOTE: These items are drop shipped from the manufacturer in Massachusetts.  Please allow an additional 2-3 business days for shipping on all heat presses.

  • $750.00

    DK3 Digital Mug Press

     This press is a full wrap-around, handle to handle, top-to-bottom printing mug press. It can press images up to 5″ high, and as close as 1/2″ from the handle, depending on the mug size.

    The DK3 is fully adjustable, accommodating all mugs available on the market. This includes 11 oz, 15 oz, 16 oz mugs, steins and stainless steel travel mugs. The ability of the press to open extra wide allows for easy and fast loading and unloading of mugs from the press. The thick solid steel framework and die-cast clamp assembly provides a heavy duty framework for non-stop use. The clamp assembly can be adjusted for very heavy pressure, allowing for full bleed transfers on even the most demanding mugs. Finally – a mug press that compensates for less than perfectly straight mugs!

    As with all Digital Knight presses, the DK3 utilizes a state-of-the-art digital control system with an unprecedented 3-year warranty on the heat-control electronics. With digital temperature, time and programmable presets, cycle counter and many other features, the consistency and productivity of mug printing is maximized.

    At the heart of the DK3 is the SuperCoil-Microwinding™ heater technology, a system of embedded heater windings that wind tightly and closely together throughout the entire platen for extremely even heat, fast recovery & fast heat up times. The DK3 will start up in only a few minutes, and unlike other presses runs constantly at the set temperature, instead of a much lower idle temperature. Unlike other mug presses that use silicone blankets with short lifespans and even shorter warranties, the DK3 boasts an amazing 3-Year / 3,000 mug warranty. The patented stainless steel mug band heater technology Geo Knight is famous for has proven to be far more reliable in the field than traditional methods.

    For the absolute best, at an amazing price, there is no better solution for pressing mugs than the DK3 Digital Knight Mug Press.

     

    NOTE: These items are drop shipped from the manufacturer in Massachusetts.  Please allow an additional 2-3 business days for shipping on all heat presses.

  • Digital Knight Universal Stand with Casters
    $295.00

    DK Universal Stand with Casters

    The Digital Knight Universal Stand is an extremely heavy-duty solid steel stand for the following Digital Knight heat press machines: DK20S, DK20SP, DC16, DC16AP, DK20, DK16

    It features a heavy steel welded framework, and industrial grade casters. The rolling casters can be locked with the foot pedals, preventing wheel pivoting and movement of the stand.

    The stand is quickly & easily assembled, and ships inexpensively by UPS. An excellent add-on for existing machines or new press purchases, all hardware & instructions are included for assembly.

     

    NOTE: These items are drop shipped from the manufacturer in Massachusetts.  Please allow an additional 2-3 business days for shipping on all heat presses.

  • DK Twin Shuttle Add-On Upgrade (for DK20)
    $650.00

    DK Twin Shuttle Attachment Upgrade (for DK20)

    The Digital Knight Twin Shuttle Upgrade is a dual station Add-On for the DK20S swing away heat press

    Everyone knows that long term costs are not in the press equipment but in Labor Costs. Adding a twin shuttle removes wasted operator time waiting for a pressing cycle to finish. It also negates heat platen idle time while waiting for the operator to load and unload. Production is maximized with no additional labor cost.

    The shuttle table creates less fatigue than swinging the head as well. Unlike easily tearable teflon ‘hammocks’, this shuttle is solid machined-flat aluminum, holding any heavy, sharp, and rigid imprintable products without concern. Laying out fabric, shirts and garments is a breeze, with the two 16×20 silicone pads positioned just like the standard table configuration on the press.

    For almost double the productivity per single operator, the Digital Knight Twin Shuttle Upgrade is an unbeatable value.

     

    NOTE: These items are drop shipped from the manufacturer in Massachusetts.  Please allow an additional 2-3 business days for shipping on all heat presses.

  • JetPress 12 (9 x 12 Swinger)
    $279.00

    JetPress 12 – 9″ x 12″ Swing Away Heat Press

    The JetPress 12 is a heavy-duty, low-cost, economical swing-away heat press. Whether you’re a weekend crafter or run your own screen print business, the JetPress 12 is perfect for start-ups, home use, and non-commercial hobby-oriented transfer printing. The JetPress 12 has all the amenities of commercial press equipment without the cost. The JetPress is ideal for users seeking professional quality imprinting results with ink-jet, bubble-jet, laser, copier and sublimation iron-on transfers. Along with the industrial lock, the JetPress 12 can administer several hundred pounds of clamping force with little operator effort while applying even pressure force, far superior to a hand iron. The digital timer and temperature gauge allows users to print at a fraction of the time. Lightweight and portable, the JetPress 12 is easy to store and easy to start whenever and wherever you need it.

     

    NOTE: These items are drop shipped from the manufacturer in Massachusetts.  Please allow an additional 2-3 business days for shipping on all heat presses.

  • JetPress 14 (12 x 14 Swinger)
    $495.00

    JetPress 14 – 12″ x 14″ Swing Away Heat Press

    The JetPress 14 (12″ x 14″ Swinger) is a heavy-duty, low-cost, economical swing-away heat press. Intended for start-ups, home use, and non-commercial, hobby-oriented transfer printing without the higher costs of commercial press equipment. Ideal for ink-jet, bubble-jet, laser, copier and sublimation iron-on transfer paper users seeking professional-quality imprinting results. Applies several hundred pounds of clamping force with little operator effort, at much better pressure and temperature than a hand iron can deliver, at a fraction of the time, and is lightweight and portable. 

     

    NOTE: These items are drop shipped from the manufacturer in Massachusetts.  Please allow an additional 2-3 business days for shipping on all heat presses.
     

     

  • From: $85.00

    All Thread Drop-On Tables

    All Thread Drop-On Tables allow you to fully thread garments from the “Front or Back”.  The tables are attached by pull-pin and are rotatable. Compatible with all 16″ x 20″ swing-away presses and all 14″ x 16″, 16″ x 20″ clamshell presses.  Customers with older model presses should contact The Embroidery Store, 1-800-504-9757 to confirm which version table is recommended.